Original Part
68 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2.5A 50mOhm
Alternative Part
70 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2.5A 50mOhm
1. BBPY00160808700Y00 Substitution Conclusion
The BBPY00160808700Y00 can serve as a direct replacement for the original part, as its key parameters align closely with the original BBPY00160808680Y00, including package (0603), rated current (2.5A), maximum DC resistance (50mΩ), and physical dimensions. The only deviation is the nominal impedance, which shifts from 68Ω to 70Ω (both measured at 100MHz). This minor variation (approximately 3%) is generally negligible in practical power filtering applications and will not affect filtering performance or circuit stability. Given that both components belong to the same Pulse Electronics product family, their frequency response and temperature characteristics are expected to be highly consistent, making the substitution highly feasible.
2. MH1608-600T Substitution Conclusion
The MH1608-600T can be considered as a conditional substitute, though specific application requirements should be reviewed. Key differences include: slightly lower impedance (60Ω @100MHz, about 12% lower than the original), which may lead to marginally reduced high-frequency noise suppression; higher rated current (3A vs. 2.5A) and lower DC resistance (40mΩ vs. 50mΩ), resulting in lower heat generation and voltage drop under the same operating current, thereby improving power efficiency. However, its nominal filter type is listed as "Power, Signal Line" (compared to the original "Power Line" only), and its height is slightly greater (1.00mm vs. 0.95mm), requiring verification of mechanical clearance. Overall, if the circuit does not demand tight impedance tolerance and physical space permits, this part can offer improved current-handling capability.
Analysis ID: F7D0-69B2000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com