Original Part
120 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 400mA 250mOhm
Alternative Part
1. BLM18AG121SN1D Substitution Conclusion
The BLM18AG121SN1D (Murata) is a viable substitute for the original part, as its core filtering characteristics (120Ω @ 100MHz) and package size (0603) are fully compatible, with all key parameters being comprehensively optimized. Its rated current (800mA) is significantly higher than that of the original part (400mA), providing greater margin, lower heat generation, and improved reliability under the same operating conditions. Additionally, its DC resistance (180mΩ) is lower than the original value (250mΩ), which helps reduce voltage drop and power loss in the signal path. This “derated usage” is electrically compatible; however, note that its impedance-frequency curve may exhibit slight differences compared to the original part. It is recommended to verify high-frequency noise suppression performance in the actual circuit.
2. EMI0603R-120 Substitution Conclusion
The EMI0603R-120 (Delevan) also offers substitution feasibility, with impedance and package specifications matching the original part. Its DC resistance (150mΩ) is further reduced, which helps minimize DC losses in the signal line. Its rated current (400mA) is equivalent to that of the original part, providing no additional margin. In high-load or transient current fluctuation scenarios, its reliability advantage is less pronounced compared to parts with higher current ratings. This part is suitable for applications sensitive to DC voltage drop where the operating current is stable and does not exceed 400mA. When substituting, ensure that the actual peak current does not exceed the rated value, and verify that its high-frequency attenuation characteristics meet circuit requirements.
Analysis ID: 0C4A-929D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com