Original Part
Alternative Part
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm
1. ACML-0603U-101B-T Substitution Conclusion
The ACML-0603U-101B-T fully matches the original part in its core electrical parameters (impedance of 100Ω @ 100MHz, rated current of 3A) and offers a lower DC resistance (30mΩ), which reduces voltage drop and power dissipation—a clear performance advantage. The differences lie in its physical dimensions and its stated filter type classification. Its length (1.65mm) is slightly greater than the original's 1.60mm, which may pose a fit risk in extremely tight PCB layouts. Furthermore, it is classified as a "Power Line" filter, whereas the original is specified for "Power, Signal Line." This suggests the manufacturer may have optimized it primarily for power rail applications. If intended for high-speed signal lines, its actual impedance profile across the relevant frequency band should be carefully evaluated against the original part's data. In summary, for applications with adequate board space and purely for power rail filtering, it serves as a high-performance substitute. For critical signal integrity paths or space-constrained designs, further validation is recommended.
2. BBUP00160808101Y00 Substitution Conclusion
The BBUP00160808101Y00 matches the original component identically in all core electrical parameters (impedance of 100Ω @ 100MHz, rated current of 3A) and provides a lower DC resistance (30mΩ), enabling reduced conduction loss. A key advantage is its physical footprint (1.60mm x 0.80mm), which is a perfect match to the original, ensuring full PCB layout compatibility. Similar to the ACML part, its stated filter type is "Power Line" instead of the original's "Power, Signal Line" designation. Given its dimensional, impedance, and current rating parity—coupled with superior DC performance—this component is a nearly ideal substitute for power line filtering applications. However, if deployment on a high-frequency signal path is considered, it is similarly advisable to verify its detailed high-frequency impedance characteristics to guarantee performance equivalence.
Analysis ID: 098F-1E01000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com