Original Part
Alternative Part
1. TPS2031DR Substitution Conclusion
The TPS2031DR can replace the TPS2021DRG4, but design verification is mandatory. The core difference lies in the input logic: the original part features an inverting input (active-low enable), whereas the TPS2031DR uses a non-inverting input (active-high enable). A direct substitution would invert the switch ON/OFF logic entirely. Unless the upstream control signal can be adapted—for example, by inverting the GPIO output logic in MCU firmware or adding an external inverter in hardware—the replacement is not feasible. Beyond this critical distinction, the two devices are identical in key electrical parameters (such as load voltage, maximum current, and on-resistance), protection features (current limiting, thermal shutdown, undervoltage lockout), and package. Once the logic compatibility is resolved, a functionally equivalent drop-in replacement is achievable.
2. TPS2031DRG4 Substitution Conclusion
The TPS2031DRG4 can also substitute for the TPS2021DRG4, subject to the same requirement for design verification. It is functionally identical to the TPS2031DR, and the only key technical difference from the original part remains the change from inverting to non-inverting input logic. The suffix “G4” solely indicates TI’s environmental (lead‑free/green) process marking and does not affect electrical characteristics or functionality. Feasibility of the substitution depends entirely on whether the system can accommodate or resolve the control‑logic inversion. Provided the logic is matched, the complete alignment in electrical performance, protection mechanisms, and package allows for a seamless replacement.
Analysis ID: 54FC-5CB9000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com