Original Part
Alternative Part
1. TL074BCD Substitution Conclusion
The TL074BCD can directly replace the original TL074CDG4, as both are JFET-input quad operational amplifiers from the same Texas Instruments (TI) series, with identical key parameters (e.g., 5.25 MHz bandwidth, 13 V/µs slew rate, 10–30 V supply range). The only improvement is a reduction in input offset voltage from 3 mV to 2 mV. This enhancement provides slightly better DC accuracy, which may result in lower error in sensitive applications such as high‑gain amplification or sensor signal conditioning. Electrical characteristics and package (14‑SOIC) remain fully compatible, allowing drop‑in replacement without circuit modifications.
2. TL074BCDT Substitution Conclusion
The TL074BCDT, offered by STMicroelectronics (ST) as an alternative, requires careful evaluation before substitution. Key differences include: a reduced gain‑bandwidth product of 3 MHz (compared to 5.25 MHz for the original), lower input bias current of 20 pA (original 65 pA), and improved input offset voltage of 1 mV. However, its supply voltage is fixed at ±18 V (i.e., 36 V total supply range), whereas the original supports a flexible 10–30 V range. The TL074BCDT may perform better in low‑frequency, high‑precision applications due to its lower leakage and improved DC accuracy, but the reduced bandwidth could limit performance in higher‑frequency circuits. Additionally, the fixed ±18 V supply requires the system power design to match this voltage. Substitution is feasible if bandwidth and supply flexibility are not critical; otherwise, full system performance verification is recommended.
Analysis ID: 43CD-2991000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com