Original Part
Alternative Part
1. TL431ACZ Substitution Conclusion
The TL431ACZ can serve as a conditional substitute for the original part, with two key differences requiring attention. First, its initial tolerance is ±1%, compared to the original’s ±0.4%, which may introduce greater error in high-precision voltage reference applications. Second, its typical cathode operating current is 600µA (versus 1mA for the original), potentially necessitating recalibration of the biasing network to maintain proper operating range. Additionally, the device is marked with the TO-92-2 (TO-226AC) package designation. Pinout compatibility with the original TO-92-3 must be verified; any difference in pin assignment or physical dimensions could prevent a drop-in replacement.
2. TL431ACLPG Substitution Conclusion
The TL431ACLPG offers a higher degree of drop-in compatibility. The primary deviation is its ±1% initial accuracy, which is wider than the original’s ±0.4%. However, its cathode current requirement of 1mA matches the original, eliminating the need for bias circuit adjustments. The package is TO-92-3 Long Body (TO-226), ensuring good physical compatibility. Furthermore, this variant specifies a typical temperature coefficient of 50ppm/°C, facilitating design assessment in applications with stringent temperature stability requirements. Nevertheless, if the system demands tight absolute voltage accuracy, the degradation in initial tolerance must be accepted.
Analysis ID: DF5D-0A8A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com