Original Part
Alternative Part
1. TL431BCLPG Substitution Conclusion
This part can be substituted, but attention should be paid to its temperature coefficient difference. The TL431BCLPG shares identical core parameters with the original part (adjustable 2.5V reference, 36V withstand voltage, 100mA output capability, ±0.4% initial accuracy). The key distinctions are its nominal output voltage of 2.495V (a mere 5mV difference, generally negligible) and its specified typical temperature coefficient of 50ppm/°C, whereas the original part's coefficient is unspecified. Over a wide temperature range, the TL431BCLPG may offer superior temperature stability, making it more advantageous for temperature-sensitive applications such as precision measurement. Both parts use the TO-92-3 package and are pin-compatible, allowing for a direct drop-in replacement. However, it is recommended to verify that the output accuracy meets requirements across the full operating temperature range in the actual circuit.
2. TL1431IZ Substitution Conclusion
This device is generally substitutable, but it exhibits inferior temperature performance and potential package/pin incompatibility. The TL1431IZ's electrical parameters closely match those of the original part (2.5V reference, 36V withstand voltage, ±0.4% tolerance). However, its temperature coefficient is 100ppm/°C, which is significantly higher than that of the TL431BCLPG, leading to greater output voltage drift with temperature changes. This makes it unsuitable for high-precision or wide-temperature-range applications. The most critical difference lies in its package: it is listed as TO-226-2/TO-92-2 (a TO-92-3 variant with only 2 pins? It should actually have 3 pins, but the datasheet must be verified). Its pinout or internal connections may differ from the original part's TO-226-3 configuration. The pin definition must be confirmed as identical before substitution. If the pinout does not match, a direct replacement is not possible.
Analysis ID: B537-07C0000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com