Original Part
Alternative Part
1. AS431IAZTR-G1 Substitution Conclusion
The AS431IAZTR-G1 can serve as a direct replacement for the original part, offering full compatibility in key parameters and superior performance in certain aspects. Both devices are adjustable shunt references with identical output voltage range (2.5V–36V), maximum output current (100 mA), and package footprint. The primary differences are the AS431IAZTR-G1’s tighter initial accuracy (±0.5% vs. ±1%) and lower cathode operating current (50 µA vs. 700 µA). The reduced cathode current significantly lowers quiescent power dissipation under standby or light-load conditions, which benefits overall system efficiency. However, note that the lower minimum cathode current may affect dynamic response speed; loop stability should be verified in high-speed or precision feedback circuits.
2. AZ431AZ-ATRE1 Substitution Conclusion
The AZ431AZ-ATRE1 meets the electrical and mechanical requirements for direct substitution, but several key parameter differences must be considered. It maintains the same output voltage range, current capability, and package as the original part, while offering improved initial accuracy (±0.4%) and a specified typical temperature coefficient (20 ppm/°C). The main deviation is its higher cathode operating current (1 mA vs. 700 µA). This requires drawing more current from the supply during normal operation, which may increase overall power dissipation—supply margin should be evaluated in low-power applications. On the other hand, the higher operating current generally improves noise performance and dynamic response of the reference, albeit with a slight increase in thermal loss. If the system is power-sensitive, the external resistor network should be recalculated accordingly.
Analysis ID: B0AC-39E8000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com