Original Part
Shunt Voltage Reference IC Adjustable 2.495V 36 VV ±0.5% 100 mA TO-92-3
Alternative Part
1. Substitution Conclusion for AS431BZTR-E1
In the vast majority of applications, the AS431BZTR-E1 can successfully replace the TL431BILPRE3. However, designers must carefully evaluate the impact of two key parametric differences.
First, the reference voltage tolerance is relaxed from ±0.5% to ±1%. This effectively doubles the potential initial error in the output voltage. Circuits with stringent requirements on absolute reference voltage accuracy may require recalibration or a reassessment of the system's error budget.
Second, the minimum cathode operating current (I_K(min)) increases from 700µA to 1mA. To ensure proper regulation, the reference source branch must now draw a higher quiescent current. In designs with extremely low power budgets or strict power efficiency constraints, this difference may exceed the allocated power budget or necessitate adjustment of the current-limiting resistor value.
On a positive note, its specified typical temperature coefficient of 20ppm/°C is a well-defined and favorable parameter, simplifying temperature stability analysis. The pin-compatible TO-92 package ensures direct physical drop-in feasibility.
2. Substitution Conclusion for AS431BZTR-G1
The electrical parameters and substitution feasibility of the AS431BZTR-G1 are identical to those of the AS431BZTR-E1. Consequently, its substitution conclusion is the same as for the E1 version, with the added benefit of being potentially better suited for applications requiring enhanced pin soldering reliability.
Compared to the original TL431BILPRE3, it presents the same two core technical differences: reference voltage accuracy (±1% vs. ±0.5%) and minimum cathode current (1mA vs. 700µA). The assessment of their impact on circuit accuracy and power consumption is exactly as detailed for the E1 part above.
The sole distinction between the AS431BZTR-G1 and the -E1 typically lies in packaging details, such as pin plating or reel packaging (e.g., G1 may feature gold plating versus tin plating for E1). This primarily affects solderability after long-term storage and contact reliability in harsh environments, with no effect on electrical performance.
Electrically, the substitution conclusion is equivalent to the E1 version. From a mechanical and reliability standpoint, the G1 version may offer superior soldering performance.
Analysis ID: FA10-DB0E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com