Original Part
Alternative Part
1. AD8682ARZ-REEL Substitution Conclusion
While the AD8682ARZ-REEL can serve as a performance upgrade, careful evaluation of its pinout and certain absolute maximum ratings is required, as it is not a direct pin-compatible replacement. Key differences are as follows: The AD8682ARZ-REEL is a dual-channel op-amp, whereas the TLE2061ID is a single-channel device. Substitution necessitates a PCB layout redesign, with proper handling of the unused channel. Its output drive capability (12mA) is significantly lower than the original part's (80mA). If the existing circuit drives a low-impedance load, the replacement may cause output distortion or failure. Furthermore, its minimum operating voltage (9V) is higher than the original's (7V), rendering it unsuitable for systems operating between 7V and 9V. However, the AD8682 offers superior performance in key parameters such as bandwidth (3.5 MHz vs. 2 MHz), slew rate (9V/µs vs. 3.4V/µs), and input offset voltage (350µV vs. 600µV). It is well-suited for new designs requiring higher speed and precision, provided the supply voltage and load conditions are compatible.
2. AD8682ARZ-REEL7 Substitution Conclusion
The substitution conclusion is identical to that for the AD8682ARZ-REEL. The AD8682ARZ-REEL7 shares identical core electrical parameters, package, and functionality with the AD8682ARZ-REEL. The suffix "-REEL7" denotes only a difference in packaging specifications (e.g., reel size, quantity) and represents an alternate packaging form of the same product. All technical considerations for substituting the TLE2061ID—including the channel count mismatch, significantly reduced output current, higher minimum operating voltage, and the performance advantages in speed and precision—are exactly the same as for the AD8682ARZ-REEL. Selection between them should be based solely on production assembly packaging requirements.
Analysis ID: 5783-C980000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com