Original Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Alternative Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
1. Substitution Conclusion for 74FCT16245CTPAG
From the perspective of core functional parameters, the 74FCT16245CTPAG is fully compatible with the original part in terms of logic type, bit width, and operating voltage range, establishing a baseline for direct functional substitution. Two primary differences exist. First, the output drive capability differs: the original part features a symmetrical 24mA/24mA drive, whereas the CTPAG offers an asymmetrical 32mA/64mA drive. The CTPAG provides stronger sink current (low-level output), making it suitable for driving larger capacitive loads or lower-impedance lines. However, the change in symmetry may affect the matching of signal rise/fall times and must be considered. Second, the package footprint differs: the original part uses a 7.50mm-wide SSOP, while the CTPAG uses a 6.10mm-wide TSSOP. The PCB pad layout must be adapted accordingly; direct soldering may not be possible if the original design lacks sufficient space. While the electrical functionality is substitutable, the impact of the asymmetric drive on timing must be evaluated, and the PCB footprint design must be modified.
2. Substitution Conclusion for 74FCT16245CTPVG8
The 74FCT16245CTPVG8 is fully consistent with the original part in terms of logic function, supply voltage, and package outline (7.50mm-wide SSOP), ensuring excellent physical compatibility. The key distinction lies in the output drive current: the original part is rated at 24mA/24mA, while the CTPVG8 is rated at 32mA/64mA. The CTPVG8's higher sink current capability (low-level output) can improve noise margin and drive heavier loads. However, this asymmetry may also lead to unequal high-to-low and low-to-high transition times. In high-speed applications or scenarios with strict timing synchronization, signal integrity verification is required. The package and basic parameters are compatible, allowing for direct physical replacement. Nevertheless, the impact of the drive current difference on timing and signal quality must be validated within the actual circuit to ensure it meets application requirements.
Analysis ID: 418B-E17E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com