Original Part
Alternative Part
1. LM2902AQS14-13 Substitution Conclusion
The LM2902AQS14-13 can generally replace the MC3403DR2G in most common applications, but several key performance differences must be considered. Its slew rate (0.3 V/µs) and gain bandwidth product (700 kHz) are lower than those of the original part (0.6 V/µs, 1 MHz), which may limit its performance in high-frequency signal processing or fast transient response applications. However, it offers a significantly lower input bias current (20 nA versus 200 nA for the original), making it advantageous in precision applications such as high-impedance sensor interfaces. Additionally, it features lower quiescent current (1 mA/ch vs. 2.8 mA/ch). The device is also AEC-Q100 qualified, making it suitable for automotive environments. One important note: its output configuration is not explicitly specified as differential. If the original design relies on differential output capability, compatibility should be verified before substitution.
2. LM2902QS14-13 Substitution Conclusion
The substitution assessment for the LM2902QS14-13 is identical to that of the LM2902AQS14-13, as both devices share the same electrical parameters—including slew rate, bandwidth, input bias current, power consumption, and automotive-grade qualification. As with the A version, the reduced bandwidth and slew rate may constrain performance in high-speed applications. Nevertheless, its low input bias current and low power consumption offer clear benefits in precision and energy efficiency. Provided the original application does not demand high speed or strict differential output performance, this part can serve as a drop-in replacement, particularly in designs requiring automotive-grade reliability.
Analysis ID: 6788-7B5E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com