Original Part
Alternative Part
1. ADM3078EYRZ-REEL7 Substitution Conclusion
The ADM3078EYRZ-REEL7 is fully compatible with the original LTC2850HS8TRPBF in terms of package, protocol, and supply voltage range (3V to 3.6V), making it a viable candidate for substitution. However, two key differences must be noted: its data rate is reduced from 20Mbps to 16Mbps, and its receiver hysteresis is significantly increased from 25mV to 100mV. The lower data rate prevents this device from supporting the original part's high-bandwidth applications (e.g., high-speed data transfer scenarios), potentially limiting its use in systems requiring 20Mbps performance. Conversely, the higher receiver hysteresis (100mV) improves noise immunity, making it suitable for electrically noisy environments and helping to reduce false triggering, though it may slightly increase signal detection latency. If the target application's data rate requirement does not exceed 16Mbps and the operating environment has substantial noise, the ADM3078EYRZ-REEL7 is a feasible alternative. Otherwise, it is not recommended for high-speed or precision timing-critical scenarios.
2. SP3078EMN-L/TR Substitution Conclusion
The SP3078EMN-L/TR is generally consistent with the original LTC2850HS8TRPBF in package and protocol. However, it features a lower data rate (16Mbps vs. 20Mbps), smaller receiver hysteresis (15mV vs. 25mV), and a fixed 3.3V supply voltage (versus the original's 3V to 3.6V range). The reduced data rate prevents it from meeting the original part's high-speed communication demands, potentially impacting real-time or bandwidth-intensive applications. The lower receiver hysteresis makes it more sensitive to noise, which can degrade signal integrity or increase bit error rates in environments with significant interference. The fixed 3.3V supply limits flexibility in systems requiring voltage adjustment or a wider operating voltage range. The SP3078EMN-L/TR may be considered as a substitute only if the target system operates stably at 3.3V, requires a data rate no greater than 16Mbps, and operates in a low-noise environment. It is not recommended for high-speed, high-noise, or variable-voltage applications.
Analysis ID: 653D-9DB0000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com