Original Part
Alternative Part
1. LM2902KPW Substitution Conclusion
From a core parameter perspective, the LM2902KPW exhibits high similarity or falls within the same order of magnitude as the original LM2902WPT in the majority of specifications, including package, bandwidth, offset voltage, and quiescent current, establishing fundamental feasibility for substitution. Two critical limitations exist: First, its maximum supply voltage (26V) is lower than the original's (30V). If the original circuit operates near or above 26V, substitution is not viable. Second, its output drive current (30mA) is lower than the original's (40mA). When driving heavy loads (such as low-impedance or high-capacitance loads), it may be inadequate or lead to performance degradation. The feasibility of substitution is highly dependent on the specific application's voltage and load conditions.
2. LM2902PW Substitution Conclusion
The LM2902PW shares identical specifications with the LM2902KPW; therefore, its substitution conclusion is exactly the same as stated above. Essentially, the LM2902PW and LM2902KPW are different commercial part numbers for the same silicon die (likely differing only in minor aspects like temperature range, packaging, or ordering code). Its feasibility as a substitute for the original LM2902WPT is similarly constrained by the lower maximum operating voltage (26V vs. 30V) and reduced output current capability (30mA vs. 40mA). In typical applications with supply voltage ≤26V and light loads (e.g., sensor signal conditioning, voltage followers, comparators), it can be considered a direct drop-in replacement. Otherwise, a re-evaluation is necessary.
Analysis ID: D727-57DE000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com