Original Part
Alternative Part
1. LM2902KAVQPWREP Substitution Conclusion
The LM2902KAVQPWREP offers notable improvements over the original LM2902MT/NOPB in key electrical parameters: the gain-bandwidth product increases from 1 MHz to 1.2 MHz, input bias current drops from 45 nA to 20 nA (reducing input error), and output current rises from 40 mA to 60 mA (enhanced drive capability), with a slight optimization in supply current. Although its input offset voltage is slightly higher (3 mV vs. 2 mV), which may have a minor impact in ultra-high-precision applications, both devices share the same supply voltage range (3–32 V) and package. In most general-purpose amplifier circuits, the LM2902KAVQPWREP can directly replace the original part, delivering better bandwidth, input accuracy, and output load capability—only the offset voltage should be checked against system precision requirements.
2. LM2902KAVQPWRG4 Substitution Conclusion
The key differences between the LM2902KAVQPWRG4 and the original LM2902MT/NOPB are its reduced output current of 30 mA (versus 40 mA originally) and a slightly lower maximum supply voltage of 30 V (compared to 32 V). However, it carries AEC-Q100 automotive-grade qualification, making it suitable for harsh-environment applications. While parameters such as gain-bandwidth product (1.2 MHz) and input bias current (20 nA) outperform the original part, its output drive capability and supply voltage adaptability are somewhat reduced. If the application does not require high output current or 32 V operation, but must meet automotive reliability standards, the LM2902KAVQPWRG4 can serve as a substitute; otherwise, load current and voltage headroom should be carefully evaluated.
Analysis ID: 7819-961B000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com