Original Part
Alternative Part
1. LM2902KPWR Substitution Conclusion
In most general-purpose applications, the LM2902KPWR can serve as a replacement for the original LM2902MT/NOPB. However, key derating points must be noted: its maximum supply voltage is reduced from 32V to 26V, and its output drive current is lowered from 40mA to 30mA. Direct substitution may pose risks if the original circuit operates near 32V or requires driving heavy loads, such as low-impedance or capacitive loads. On the other hand, the KPWR offers performance improvements, including lower input bias current (20nA vs. 45nA) and a higher gain-bandwidth product (1.2MHz vs. 1MHz), which enhance DC accuracy and frequency response. Its well-defined slew rate specification (0.5V/µs) also provides a solid basis for dynamic performance design. For applications confirmed to operate below 26V with no high-current drive requirements, the KPWR is a functionally equivalent, and in some aspects slightly optimized, substitute.
2. LM2902KAVQPWR Substitution Conclusion
The LM2902KAVQPWR is a closer electrical match to the original part and offers higher reliability compared to the KPWR. The key difference is that while retaining the performance advantages of the KPWR (low bias current, high bandwidth), it raises the maximum supply voltage rating to 30V. This brings it closer to the original part's 32V specification than the KPWR's 26V, widening the substitution window for higher-voltage applications. The most critical distinction is its AEC-Q100 automotive-grade qualification. It far exceeds standard commercial or industrial-grade chips in manufacturing standards, quality control, and reliability metrics such as temperature range, operational life, and stress tolerance. For applications demanding high reliability—such as automotive electronics and industrial control—or for circuits operating between 26V and 30V, the KAVQPWR is not only a viable substitute but an upgrade in both performance and reliability.
Analysis ID: A616-08AC000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com