Original Part
Temperature Sensor Digital, Local/Remote 0°C ~ 85°C 7 b (Local), 10 b (Remote) 8-VSSOP
Alternative Part
Temperature Sensor Digital, Local/Remote -40°C ~ 125°C 11 b 8-MSOP
Temperature Sensor Digital, Local/Remote -40°C ~ 125°C 11 b 8-MSOP
1. EMC1422-1-ACZL-TR Substitution Conclusion
This part is technically viable as a high-performance substitute, though attention must be paid to its reduced feature set and required software adaptation. Compared to the original LM90, the EMC1422 offers significant improvements in core performance: a wider temperature measurement range (Local: -40°C to +125°C, Remote: -64°C to +191°C), higher accuracy (±1°C vs. ±4°C), and a uniformly higher 11-bit resolution. It can provide more accurate and granular temperature data in more demanding environments. The primary drawback is its feature set, which lacks the One-Shot conversion mode and the Standby mode found on the LM90, retaining only the Shutdown mode. This may limit flexibility in applications requiring on-demand single-shot measurements or entry into a low-power standby state (as opposed to a complete shutdown). Furthermore, while the SMBus interface and package are compatible, the internal register map and configuration methodology are necessarily different. A complete re-write or adaptation of the device driver software is mandatory.
2. EMC1402-3-ACZL-TR Substitution Conclusion
This part represents a closer and more feasible direct replacement, requiring software adaptation. Compared to the original LM90, the EMC1402-3's performance parameters are essentially identical to the EMC1422, featuring the same wider temperature range, higher accuracy (±1°C), and resolution (11-bit). Its most critical advantage is the high degree of feature set overlap. It provides both the One-Shot mode and the Standby mode present on the LM90, lacking only the Shutdown mode (though Standby typically satisfies low-power requirements). This allows for a high-performance upgrade while better maintaining compatibility with the original design's logic for measurement triggering and low-power state management. As with the EMC1422, its package and electrical interface (SMBus, 3.3V supply) are compatible. However, the core prerequisite for a successful substitution remains the same: the software's register configuration and read/write logic must be comprehensively updated according to the new device's datasheet.
Analysis ID: 9680-E272000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com