(HKG) +86 755 8277 4696
WhatsAppWhatsApp
English
SkyChip
0
Original Part

Standard Amplifier 2 Circuit Differential, Rail-to-Rail 8-VSSOP

Quote
Alternative Part

CMOS Amplifier 2 Circuit Rail-to-Rail 8-MSOP

Quote

CMOS Amplifier 2 Circuit Rail-to-Rail 8-MSOP

Quote
1. BU7266FVM-TR Substitution Conclusion Direct substitution is not viable. The BU7266FVM-TR is significantly inferior to the LMV772 in nearly all critical dynamic performance and precision parameters. Its extremely low slew rate (0.0024 V/µs vs. 1.4 V/µs) and gain-bandwidth product (4 kHz vs. 3.5 MHz) limit its use to processing ultra-low-frequency signals near DC. It is entirely unsuitable for the original part's intended general-purpose amplification applications—such as audio or sensor signal conditioning—which require a certain level of speed. Furthermore, its input offset voltage (1 mV vs. 250 µV) is four times larger, and its output drive capability (4 mA vs. 75 mA) is severely inadequate. Its sole advantage is an exceptionally low quiescent current (700 nA), making it applicable only in specific scenarios with extreme power sensitivity and no requirements for signal frequency or accuracy.
2. BU7486FVM-TR Substitution Conclusion Conditional substitution is possible, but system requirements for precision and power consumption must be carefully evaluated. The BU7486FVM-TR offers superior dynamic performance compared to the original part. Its higher slew rate (10 V/µs) and gain-bandwidth product (10 MHz) enable it to handle higher-frequency and faster-changing signals. The key differences lie in its input precision and power consumption: its input offset voltage (1 mV) is four times that of the LMV772 (250 µV), which may be unacceptable for applications requiring high DC accuracy, such as precision sensor amplification or instrumentation. Additionally, its quiescent current (6 mA) is five times higher than that of the LMV772 (approximately 1.2 mA), making it unsuitable for battery-powered devices. Substitution can be considered if the application prioritizes speed over ultimate precision and has sufficient power supply headroom.
Analysis ID: 9ACD-DB54000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com