Original Part
Alternative Part
1. LM2904VQDRQ1 Substitution Conclusion
The LM2904VQDRQ1 can serve as a replacement for the original LM2904VQDR, provided output current limitations and automotive-grade application requirements are considered. Key differences include a lower output current (30 mA vs. the original 40 mA), which may result in insufficient performance when driving high loads or in circuits demanding higher output current. Other parameters, such as slew rate (0.3V/µs), gain bandwidth product (700 kHz), and supply voltage range (3 V to 26 V), remain consistent with the original part. Additionally, the LM2904VQDRQ1 carries automotive-grade qualification (AEC-Q100), indicating its suitability for high-reliability environments like automotive electronics. However, if the original application has strict output current requirements (e.g., exceeding 30 mA), substitution may lead to reduced drive capability, necessitating a review of load conditions.
2. LM2904WHDT Substitution Conclusion
The LM2904WHDT can replace the original LM2904VQDR and offers significant performance improvements, though supply voltage and power consumption compatibility must be verified. Differences include a higher slew rate (0.6V/µs vs. the original 0.3V/µs) and a higher gain bandwidth product (1.1 MHz vs. 700 kHz), delivering better performance in high-frequency or fast-signal processing applications. It also features lower input offset voltage (2 mV vs. 3 mV), improving amplification accuracy, and a higher maximum supply voltage (30 V vs. 26 V), offering greater supply flexibility. Furthermore, its supply current is lower (700µA vs. the original 1mA), potentially reducing overall power consumption. These enhancements allow the LM2904WHDT to serve as a direct replacement with improved performance in most applications. However, if the original design relies on the lower supply voltage limit (e.g., strictly within 26 V), system compatibility should be validated.
Analysis ID: 0C74-376D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com