Original Part
Alternative Part
1. AMP04FSZ-RL Substitution Conclusion
The AMP04FSZ-RL can serve as a substitute for the INA126UAG4, provided the supply voltage is compatible. However, several key differences must be considered. The supply range of the AMP04FSZ-RL (5V to 30V) is narrower than that of the original part (2.7V to 36V). Consequently, it cannot be used in any system operating below 5V, such as a single-supply 3.3V design. Its advantages include a significantly lower input offset voltage (30µV vs. 150µV), which enables higher DC measurement accuracy, and a wider bandwidth (700kHz vs. 200kHz), offering improved dynamic response. On the downside, its input bias current (22nA vs. 10nA) and quiescent current (750µA vs. 175µA) are notably higher. The higher bias current has a greater impact on accuracy when interfacing with high-impedance signal sources, while the higher quiescent current increases overall power dissipation. The suffix "-RL" denotes reel/tape packaging and does not affect electrical performance.
2. AMP04FSZ-R7 Substitution Conclusion
The AMP04FSZ-R7 is electrically identical to the AMP04FSZ-RL. Therefore, the substitution conclusion is exactly the same as detailed above: it is a viable replacement if the system supply voltage is confirmed to be at least 5V. This substitution provides performance gains in DC accuracy and bandwidth but comes at the cost of increased input bias current and higher power consumption. The part number suffixes "-R7" and "-RL" represent different reel packaging specifications (e.g., quantity per reel or reel dimensions). The core parameters and functionality of the die are identical. The choice between them depends solely on procurement and assembly line packaging requirements.
Analysis ID: DBE1-7933000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com