Original Part
Alternative Part
1. ISL4485EIBZ Substitution Conclusion
The ISL4485EIBZ is pin- and function-compatible; however, its data rate (20 Mbps) is lower than that of the original part (30 Mbps). Direct substitution will result in communication failure if the original design operates at high speed (close to 30 Mbps). On the other hand, its receiver hysteresis (70 mV) is significantly higher than the original’s (50 mV), meaning the ISL4485EIBZ offers better noise immunity and more robust signal detection under the same noisy conditions. If the actual application data rate does not exceed 20 Mbps, or if the operating environment is particularly noisy, this device can be considered a viable alternative—trading speed for improved noise immunity. Otherwise, it is not suitable.
2. LTC1481IS8TRPBF Substitution Conclusion
The LTC1481IS8TRPBF is compatible in package and basic functionality, but its key limitation is the data rate (2.5 Mbps), which is far lower than the original part’s 30 Mbps. It is only suitable for very low-speed communication scenarios. Direct replacement will fail to meet the performance requirements of medium- to high-speed applications. Its receiver hysteresis (45 mV) is similar to the original (50 mV), so noise margin is essentially unchanged. This device could only serve as a substitute in applications with extremely low baud rates (e.g., ≤2.5 Mbps) where specific cost or supplier requirements exist. For the original design’s intended medium- to high-speed applications, it is not a feasible alternative.
Analysis ID: 1914-2E64000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com