Original Part
Alternative Part
1. AZ431AZ-ATRG1 Substitution Conclusion
The AZ431AZ-ATRG1 can serve as a high-performance upgrade substitute for the TL431ACLPRE3. Its core advantages lie in a significant improvement in tolerance from ±1% to ±0.4%, and a typical low temperature coefficient of 20ppm/°C. This effectively enhances the stability of the reference voltage across the full operating temperature range and improves overall system accuracy. A key difference is its cathode operating current requirement of 1mA, which is higher than the original part's 600µA. For a direct replacement, the circuit biasing the divider resistors and the TL431 itself must be recalculated to ensure sufficient current for proper operation; otherwise, inaccurate reference voltage or failure may occur. If the design can provide adequate current margin, this part offers superior performance in both accuracy and temperature drift compared to the original.
2. TL431CLPRPG Substitution Conclusion
The TL431CLPRPG can be considered as a downgrade or cost-reduction alternative to the TL431ACLPRE3, but requires careful evaluation. The key differences are a relaxed tolerance of ±2.2% and a typical temperature coefficient of 50ppm/°C, which is likely worse than the unspecified performance of the original part. This will directly lead to increased initial error and temperature-induced drift of the system reference voltage, potentially making it unsuitable for applications with stringent voltage accuracy requirements. Another difference is its cathode operating current requirement of 1mA, necessitating the same circuit adaptation considerations as the part above. This part should only be considered for substitution in applications that are extremely cost-sensitive and have relaxed requirements for initial accuracy and temperature stability.
Analysis ID: F14A-87DF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com