Original Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Alternative Part
1. PI6C2405A-1HWIE Substitution Conclusion
The PI6C2405A-1HWIE is a potential substitute for the original part 2305A-1DCG8, with core parameters such as frequency, voltage, package, and functionality being essentially identical. However, two key technical differences exist. First, the original part explicitly supports PLL bypass (PLL: Yes with Bypass), whereas the substitute only indicates “PLL: Yes,” potentially lacking the bypass option. This may limit flexibility in applications requiring signal pass-through or low-power testing. Second, the original part supports LVTTL input and multiple output standards (CMOS, LVCMOS, TTL), while the substitute only supports TTL input and output. If the system uses LVTTL-level signals or requires CMOS/LVCMOS-compatible outputs, the substitute could cause level mismatch or interface compatibility issues, impacting circuit reliability and performance. Substitution is only feasible if the application strictly uses TTL levels and does not require PLL bypass; otherwise, design compatibility must be carefully evaluated.
2. PI6C2405A-1HWEX Substitution Conclusion
The PI6C2405A-1HWEX shares identical parameters with the PI6C2405A-1HWIE, and the feasibility conclusion for substituting the original 2305A-1DCG8 is the same. The differences lie in PLL bypass capability and input/output standards. The original part provides PLL bypass (PLL: Yes with Bypass), while the substitute does not explicitly specify this feature, which may prevent bypassing the PLL in certain modes and affect system debugging or power management. Additionally, the original part supports LVTTL input and multiple outputs (CMOS, LVCMOS, TTL), whereas the substitute is limited to TTL input and output. This restricts its suitability in mixed-signal environments. If the original design relies on LVTTL levels or needs to drive CMOS loads, substitution could lead to signal integrity or drive capability issues. Feasibility depends on whether the actual application involves only standard TTL interfaces and does not require bypass functionality; otherwise, circuit compatibility must be re-verified.
Analysis ID: AD5E-ED97000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com