Original Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
Alternative Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
1. 74FCT162H245ATPVC Substitution Conclusion
From a functional and core parametric perspective, this part is fully consistent with the original device in terms of logic type, bit width, and supply voltage, providing the fundamental conditions for direct substitution. Two key differences exist: First, the output drive capability differs. The ATPVC provides symmetrical 24mA output current for both high and low levels, whereas the original device offers asymmetrical 32mA/64mA. When driving heavy loads or highly capacitive buses, the ATPVC's drive margin (particularly on the low side) may be insufficient. It is necessary to evaluate whether the actual load current exceeds its capability. Second, the package is a 48-BSSOP (wide-body, 7.50mm), which is incompatible with the pad layout width of the original 48-TSSOP (narrow-body, 6.10mm). Direct drop-in replacement on the existing PCB footprint is not possible, requiring either a redesigned footprint or an adapter solution. Functionally substitutable, but due to package incompatibility and weaker drive strength, this part is suitable only for applications with lower load current requirements and where PCB layout modifications are permissible.
2. 74FCT162H245CTPACT Substitution Conclusion
This device is fully consistent with the original part in logic function, supply voltage, and package (48-TFSOP, same as TSSOP, 6.10mm width), ensuring direct physical and electrical interface compatibility. The key difference remains the output drive current: its symmetrical 24mA output is lower than the original's 32mA/64mA. Under identical load conditions, the CTPACT may exhibit slightly higher output voltage drop and marginally slower edge rates. However, for the vast majority of digital signal transmission applications, 24mA drive capability meets standard bus requirements. With package compatibility and functional match, the drive current difference is acceptable in most applications, allowing for direct substitution. It is recommended to validate signal integrity post-substitution, particularly under heavy-load or high-frequency conditions.
Analysis ID: 795C-0AB1000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com