Original Part
120 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 1.2A 130mOhm
Alternative Part
120 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 1.2A 130mOhm
1. ACML-0603H-121-T Substitution Conclusion
Based on key electrical parameters and package dimensions, the ACML-0603H-121-T is a viable substitute for the original part LMMGG160808T121RG. Its primary advantage is an approximately 23% reduction in DC resistance (DCR) (100mΩ vs. 130mΩ). Under identical operating current, this substitute will exhibit lower DC voltage drop and power dissipation, which is beneficial for power path efficiency. The noted differences are that it does not explicitly specify a "Power Line" filter type, and its maximum height is slightly increased by 0.05mm. This requires the designer to verify whether its high-frequency attenuation curve on the target power line fully matches that of the original part and to confirm that the available PCB mounting space, particularly in the Z-axis, is sufficient.
2. LBMGG160808T121RG Substitution Conclusion
The LBMGG160808T121RG is a highly compatible substitute for the original LMMGG160808T121RG, as both are from the same manufacturer (Taiyo Yuden) and share identical key electrical parameters, including impedance-frequency characteristics, rated current, and DC resistance. The sole difference is an increase in maximum height by 0.1mm (1.00mm vs. 0.90mm). In applications with extremely tight board layout constraints, especially where vertical clearance to adjacent components or the enclosure is critical, mechanical compatibility must be verified. Provided mounting space is adequate, this part can be used as a direct electrical replacement.
Analysis ID: DF6D-CB27000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com