Original Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Alternative Part
1. PI6C2405A-1HWIE Substitution Conclusion
This device can serve as a direct functional replacement; however, attention must be paid to level compatibility and PLL feature details.
The key parameters of this part closely match the original: both are 1:5 zero‑delay buffers operating at 133 MHz with 3.3 V supply and identical package. The primary difference lies in the input/output level standards: the original supports more flexible LVTTL inputs and CMOS/LVCMOS/TTL outputs, whereas the PI6C2405A-1HWIE is limited to TTL inputs and outputs. If the original design relies on LVTTL or CMOS threshold levels, direct substitution may cause signal compatibility issues, such as threshold voltage mismatch. Additionally, the original part explicitly specifies a “PLL with bypass function,” while the substitute does not indicate this feature. If the system requires PLL bypass mode—for testing or low‑power scenarios—further verification of its feasibility is recommended.
2. PI6C2405A-1HWIEX Substitution Conclusion
Identical to the PI6C2405A-1HWIE in all electrical aspects; substitution feasibility is the same, though supply‑chain or suffix‑specific variations should be noted.
This part’s parameters are exactly the same as those of the PI6C2405A-1HWIE. The core differences remain the TTL‑only level support (the original supports multiple levels) and the unspecified PLL bypass function. The suffix “X” typically denotes non‑electrical variations such as tape‑and‑reel packaging, lead‑free process, or lot code, and does not affect electrical performance. Therefore, the substitution conclusion aligns with the previous part: level compatibility is the key constraint. If the system signals meet TTL standards and PLL bypass is not required, substitution is viable; otherwise, a re‑evaluation is necessary. It is advisable to consult the manufacturer’s datasheet to confirm PLL functionality and level tolerances.
Analysis ID: 3FE5-2E6F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com