Original Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Alternative Part
1. CDCVF2505DG4 Substitution Conclusion
The CDCVF2505DG4 can serve as a limited substitute for the 2305A-1HDCGI8 in core functions—including 1:5 zero-delay buffering/driving, PLL with bypass capability, supply voltage, and package footprint. However, two critical differences must be noted. First, its maximum supported frequency is 200 MHz, exceeding the original device’s 133 MHz, which may offer advantages in higher‑frequency applications provided the system clock operates within this range. Second, its outputs are LVTTL‑only, whereas the original device supports a wider range of CMOS, LVCMOS, and TTL levels. This introduces potential electrical‑compatibility risks when driving non‑LVTTL loads, such as certain CMOS devices. Substitution is acceptable in LVTTL‑based systems where wide output‑level compatibility is not required and the clock frequency aligns; otherwise, careful validation of the load interface is necessary.
2. CDCVF2505DRG4 Substitution Conclusion
The CDCVF2505DRG4 is electrically identical to the CDCVF2505DG4 across all provided technical parameters. Typically, the “R” designation in TI part numbers indicates reel‑tape packaging variations rather than any functional difference. Consequently, its substitution feasibility matches that of the DG4 version: it may serve as a limited replacement in LVTTL‑level systems operating below 200 MHz, but carries the same load‑compatibility concerns due to its LVTTL‑only output support. Prior to replacement, verify that the input‑level requirements of downstream devices are compatible.
Analysis ID: E271-4E26000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com