Original Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Alternative Part
1. PL123-05SC Substitution Conclusion
The PL123-05SC aligns with the original part 2305A-1HDCGI8 in core functionality (zero-delay buffer with PLL bypass), supply voltage (3V–3.6V), output ratio (1:5), and package (8-SOIC). Its maximum frequency of 134MHz is slightly higher than the original’s 133MHz, which in most applications can be considered a compatible upgrade.
The key difference lies in the I/O types: the original part explicitly specifies LVTTL inputs and CMOS/LVCMOS/TTL multi-standard outputs, whereas the PL123-05SC only labels its I/Os as “Clock” without clarifying the logic level standard. This introduces a risk of interface level mismatch during substitution. For example, if the PL123-05SC only supports a single LVCMOS level while the original design relies on TTL compatibility, signal integrity or drive capability issues may arise.
Substitution is generally feasible, but it is essential to consult the Microchip datasheet to verify the specific logic levels, pin mapping, and timing characteristics to ensure full compatibility with the system.
2. PL123S-05SC Substitution Conclusion
The PL123S-05SC has nearly identical parameters to the PL123-05SC (including frequency, voltage, ratio, and package). The substitution conclusion relative to the original part is similar: electrical performance and mechanical compatibility are good, but the same ambiguity regarding I/O types exists. The original part’s LVTTL input and multi-standard output contrast with the PL123S-05SC’s generic “Clock” labeling.
During substitution, special attention must be paid to logic level compatibility. If the PL123S-05SC does not support the specific level standard required by the original design (e.g., TTL thresholds), it may lead to noise margin degradation or logic errors.
Substitution is viable once level matching and pin compatibility are confirmed; otherwise, circuit adjustments or a better-matched alternative should be considered.
Analysis ID: 415A-8424000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com