Original Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
Alternative Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
1. Substitution Conclusion for 74FCT162245ATPVCT
The 74FCT162245ATPVCT is functionally identical to the original 74FCT162245ATPAG8 in terms of logic function, supply voltage range (4.5V to 5.5V), and output current (24mA high/low). However, a key difference exists in the package footprint: the original device uses a 48-TFSOP package with a width of 6.10mm, while the substitute is housed in a 48-BSSOP package with a 7.50mm width. If the PCB layout cannot accommodate the wider body, a pin-to-pin (drop-in) replacement is not feasible, and board space would need to be redesigned. Provided the pinout is compatible and sufficient physical clearance exists in the system, an electrically compatible substitution is possible, but mechanical fit and thermal conditions must be verified.
2. Substitution Conclusion for 74FCT16245TPVCG4
The 74FCT16245TPVCG4 matches the original device in logic type and supply voltage specifications. Two notable differences exist: First, the package is a 48-BSSOP (7.50mm wide), which is wider than the original 48-TFSOP (6.10mm) and may lead to PCB layout incompatibility. Second, the substitute offers higher output current (32mA high / 64mA low vs. the original 24mA high/low), providing stronger drive capability that could improve signal integrity. However, this may also increase system power consumption, noise, and overshoot risk. Load matching and power supply design must be evaluated. Feasibility for substitution is low unless the system can accommodate the package change and electrical compatibility is verified under the higher output current conditions.
Analysis ID: F433-EFBB000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com