Original Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Alternative Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
1. CY74FCT16245TPVCT Substitution Conclusion
The CY74FCT16245TPVCT can serve as a functional substitute for the original part, representing a “high-performance, with considerations” replacement. The key difference lies in its drive capability: its output low-level current (I_OL) is rated at 64mA, significantly higher than the original part’s 24mA. This grants it stronger ability to drive heavy loads (such as multiple bus lines or several load ICs) and may offer improved noise immunity. However, the stronger pull-down capability can also result in sharper signal edges, which may require closer attention to signal integrity in certain transmission line environments. The two devices are fully compatible in terms of logic function, supply voltage, and pinout (both in 48-BSSOP package). This makes them directly interchangeable in the vast majority of applications that do not involve critical timing or complex EMC requirements.
2. 74FCT162245ATPACT Substitution Conclusion
The 74FCT162245ATPACT is an “electrically equivalent” substitute for the original part in terms of key parameters, but it features one critical physical difference. Its core I/O characteristics (24mA drive current) and supply voltage range are identical to the original, ensuring compatibility in electrical interface behavior. However, it is offered in a narrower 48-TSSOP package (6.10mm width) instead of the original 48-SSOP/BSSOP package (7.50mm width). Direct pin-to-pin soldering is therefore not possible, necessitating a redesign of the PCB footprint and layout. This part is a viable alternative only when a board redesign is feasible; it cannot be used as a drop-in replacement for hardware already in production.
Analysis ID: 79C3-BA88000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com