Original Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
Alternative Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
1. 74FCT16245TPVCG4 Substitution Conclusion
The device is fully consistent with the original part in key electrical parameters, including core logic function, supply voltage, and drive current (32mA/64mA). The primary difference lies in the package: it utilizes a wider 48-BSSOP (7.50mm) versus the original 48-TFSOP (6.10mm). While it is a direct functional and performance replacement, the variance in package footprint and pin pitch renders the PCB layout incompatible. Substitution necessitates a board redesign or verification that the mounting space and pad pattern are compatible. Therefore, this is a conditional replacement requiring board modification.
2. 74FCT162H245ATPACT Substitution Conclusion
This device is identical to the original part in logic function, supply voltage, and package (48-TFSOP), ensuring direct physical compatibility. The key deviation is its symmetrical and reduced output drive capability of 24mA/24mA, compared to the original's asymmetric 32mA (high) / 64mA (low). It is a direct drop-in replacement at the board level. However, the reduced drive strength, particularly the significant decrease in low-level output current, may degrade signal integrity (e.g., rise/fall times, noise margin) when driving heavy loads, such as multiple loads or in long-line transmission scenarios. Substitution requires careful assessment of the actual load conditions. It is suitable for direct replacement in lightly loaded systems but poses a risk in heavily loaded applications. This constitutes a replacement that demands cautious evaluation of load conditions.
Analysis ID: F217-D5A0000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com