Original Part
Alternative Part
1. LM2904DRG4 Substitution Conclusion
The LM2904DRG4 can functionally substitute for the BA2904SF-E2. However, its maximum operating voltage (26V) is significantly lower than the original part's 32V, which is the most critical limitation. If the existing circuit or potential application operates near or above 26V, this substitution carries a risk of overvoltage damage. Additionally, its input offset voltage (3mV) is slightly higher than the original's 2mV, which may have a minor impact in applications with stringent DC precision requirements. On the other hand, it offers performance advantages in bandwidth (700kHz vs. 500kHz) and slew rate (0.3V/µs vs. 0.2V/µs), resulting in faster dynamic response, and it has a stronger output drive capability (40mA vs. 30mA). Both parts use an 8-SOIC package but have different body widths (3.90mm vs. 4.40mm), requiring verification of PCB layout compatibility. Provided the operating voltage does not exceed 26V, the package difference is acceptable, and the slightly reduced DC precision is tolerable, the LM2904DRG4 can be used as a substitute. It is particularly suitable for applications requiring higher bandwidth and output capability.
2. LM358ADRG4 Substitution Conclusion
The LM358ADRG4 is a more viable substitution candidate. Its key parameters closely align with those of the original BA2904SF-E2, and it features a lower input bias current (15nA), which helps reduce input error. The primary difference is its maximum operating voltage of 30V, which is still lower than the original's 32V, necessitating confirmation that the application voltage remains within this safe limit. Its bandwidth (700kHz) and slew rate (0.3V/µs) are similarly superior to the original part, offering better dynamic performance, and its output current (40mA) is also higher. The package difference is identical to that of the LM2904DRG4. Provided the operating voltage does not exceed 30V, the LM358ADRG4 is a substitute with comparable, and in some aspects superior, performance. It is especially suitable for applications with higher requirements for input bias current and dynamic response, making it a closer match to the original part's electrical characteristics than the LM2904DRG4.
Analysis ID: B896-099F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com