Original Part
Alternative Part
1. LM358DR Substitution Conclusion
The LM358DR can generally replace the BA2904SF-E2 in most general-purpose applications, though several key differences must be considered. The LM358DR has a slightly lower maximum supply voltage (30V) compared to the original part (32V), which may limit its use in circuits operating close to 32V. It offers superior high-frequency performance due to its higher gain-bandwidth product (700kHz vs. 500kHz) and slew rate (0.3V/µs vs. 0.2V/µs), along with greater load drive capability thanks to its higher output current (40mA vs. 30mA). The primary concern is its slightly higher input offset voltage (3mV vs. 2mV), which could affect DC precision in sensitive applications. Overall, the LM358DR can serve as a drop-in replacement provided the operating voltage does not exceed 30V and minor accuracy variations are acceptable.
2. LM2904DR Substitution Conclusion
Substituting the LM2904DR for the BA2904SF-E2 requires caution, primarily due to supply voltage limitations. The LM2904DR has a maximum operating voltage of only 26V, significantly lower than the original’s 32V rating. If the original circuit operates above 26V, this substitution is not feasible. Other parameters such as bandwidth (700kHz), slew rate (0.3V/µs), and output current (40mA) are equal to or better than those of the original part, though the input offset voltage (3mV) is similarly higher. The LM2904DR is suitable only for systems with a supply voltage ≤26V. Under this condition, its performance is favorable, but power supply compatibility must be verified first to avoid device failure or functional issues.
Analysis ID: 9F6F-C32F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com