Original Part
Alternative Part
1. LM2904AVQPWR Substitution Conclusion
From the perspective of core performance and package, the LM2904AVQPWR is a highly viable direct replacement. Its key advantages include a higher gain-bandwidth product (700 kHz vs. 500 kHz) and slew rate (0.3V/µs vs. 0.2V/µs), resulting in faster dynamic response. The lower input offset voltage (1 mV vs. 2 mV) contributes to improved DC accuracy, while the higher output current (40 mA vs. 30 mA) provides greater load drive capability. The primary difference requiring verification is the maximum supply voltage (30V vs. 32V). If the actual application voltage does not exceed 30V, the parts are fully compatible. Both devices utilize an 8-pin TSSOP package with a 4.40mm width and are pin-to-pin compatible, enabling a direct drop-in replacement.
2. LM2904PW Substitution Conclusion
The LM2904PW requires careful evaluation as a potential substitute, as its suitability depends heavily on specific application conditions. While it shares the same performance improvements in bandwidth, slew rate, and output current as the LM2904AVQPWR, it presents two key limitations. First, its typical input offset voltage is higher (3 mV vs. 2 mV), which may introduce greater error in high-precision DC amplification circuits. Second, its maximum supply voltage is further reduced to 26V (vs. 32V), significantly narrowing the operational voltage range. This device can only be considered a viable alternative if the actual circuit operates well below 26V and is not sensitive to input offset voltage, despite its pin-compatible package.
Analysis ID: 69F4-A235000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com