Original Part
Alternative Part
1. LM358PW Substitution Conclusion
The LM358PW exhibits high similarity to the original BA2904SFV-E2 in core parameters such as dual-channel architecture, input bias current, quiescent current, and lower supply voltage range. However, its gain bandwidth product (700kHz vs. 500kHz) and slew rate (0.3V/µs vs. 0.2V/µs) are slightly higher, which may offer marginally better performance in high-frequency or fast transient response applications. On the other hand, its input offset voltage (3mV vs. 2mV) is slightly larger, which could have a minor impact on applications requiring high DC precision. Additionally, its maximum supply voltage (30V vs. 32V) is somewhat lower, so it is necessary to verify that the actual operating voltage does not exceed this limit. If the system supply voltage remains below 30V and slight precision deviations are acceptable, the LM358PW can serve as a direct replacement. Package compatibility (identical SSOP and TSSOP footprints) also supports pad adaptation.
2. LM2904PWRG3 Substitution Conclusion
The key difference between the LM2904PWRG3 and the original BA2904SFV-E2 lies in its maximum supply voltage of only 26V (compared to 32V for the BA2904SFV-E2). This may pose reliability risks in higher voltage operating environments, such as industrial 24V systems with insufficient margin. Its performance parameters—gain bandwidth product (700kHz) and slew rate (0.3V/µs)—are superior to those of the original part, but its input offset voltage (3mV vs. 2mV) is similarly slightly higher. If the application voltage range consistently remains below 26V and bandwidth requirements are not stringent, this device can substitute the original component, provided sufficient voltage margin is confirmed. However, if the system design relies on the original part’s wide voltage tolerance, substitution is not feasible.
Analysis ID: 2DDE-C33A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com