Original Part
Alternative Part
1. BR24G64FVM-3AGTTR Substitution Conclusion
From a technical parameter perspective, the BR24G64FVM-3AGTTR matches the original part in package compatibility (8-MSOP) and core functionality (64Kbit I2C EEPROM). However, two key differences exist: first, its clock frequency is increased to 1 MHz (versus the original 400 kHz), offering higher I2C communication speed, which requires host controller support for this rate. Second, its operating voltage range is wider (1.7V–5.5V), with a lower minimum than the original's 2.5V, enabling compatibility with lower-voltage systems. If the design can accommodate the higher communication speed and does not rely on operation below 2.5V, this part can serve as a substitute. Verification of host I2C timing compatibility with the high-speed mode is necessary.
2. BR24T64FVM-WTR Substitution Conclusion
The BR24T64FVM-WTR fully matches the original part in capacity, interface (400 kHz I2C), and package (8-MSOP). The primary difference is its extended operating voltage range of 1.6V–5.5V (compared to the original 2.5V–5.5V), allowing it to adapt to lower-power or wider voltage scenarios. If the system voltage always remains above 2.5V, their electrical characteristics are essentially equivalent. If the system may operate within the 1.6V–2.5V range, the substitute offers an advantage. Disregarding the difference in lower voltage limit, this part is a direct replacement, though minor timing adjustments at very low voltages should be noted.
Analysis ID: 1414-527A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com