Original Part
Digital Potentiometer 50k Ohm 1 Circuit 128 Taps I2C Interface SC-70-6
Alternative Part
Digital Potentiometer 10k Ohm 1 Circuit 128 Taps I2C Interface SC-70-6
Digital Potentiometer 100k Ohm 1 Circuit 128 Taps I2C Interface SC-70-6
1. AD5247BKSZ10-RL7 Substitution Conclusion
Direct substitution is not feasible. The primary discrepancy lies in its end-to-end resistance of 10 kΩ, which is only one-fifth of the original part's 50 kΩ. This would fundamentally alter the voltage division ratio or current setpoint in the same circuit, potentially causing circuit malfunction or performance to deviate from the design specification. Furthermore, its minimum operating voltage is 2.7 V, higher than the original's 1.8 V, rendering it inoperative within the critical 1.8 V to 2.7 V low-voltage range. This severely limits power supply compatibility. Although its temperature coefficient (45 ppm/°C) is significantly better than the original's (150 ppm/°C), offering superior resistance stability over temperature, the fundamental conflicts in resistance value and voltage range remain primary and irreconcilable constraints.
2. AD5247BKSZ100-1RL7 Substitution Conclusion
Direct substitution is not viable. The key difference is its end-to-end resistance of 100 kΩ, double the original 50 kΩ value. This directly impacts the circuit's voltage division ratio, time constant, or bias current. Restoring original functionality would require re-evaluating and adjusting surrounding circuit parameters. Similarly, its minimum operating voltage of 2.7 V fails to cover the original part's full 1.8 V to 5.5 V range. This is particularly problematic for low-voltage applications below 2.7 V, where the device would not function. Its superior temperature coefficient (45 ppm/°C) provides better resistance stability in high-temperature environments, which is a performance advantage. However, this benefit cannot offset the fundamental obstacles posed by the mismatch in the core parameters of resistance value and supply voltage.
Analysis ID: 9AA3-25B9000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com