Original Part
Alternative Part
1. SA6-09 Substitution Conclusion
The substitution of SA6-09 for the original SA18H-09 is conditionally feasible, provided that key parameters—attenuation value, impedance, and power rating—are identical. The feasibility is entirely dependent on the application's frequency range. The most critical distinction lies in the frequency coverage: the SA6-09 supports only 0–6 GHz, whereas the original part is rated for broadband applications up to 18 GHz. If your circuit or system operates within 6 GHz, the SA6-09 is a fully compatible, direct replacement in terms of electrical performance. However, for operation above 6 GHz, using the SA6-09 would introduce significant additional insertion loss and performance degradation, rendering it non‑functional and therefore not a valid substitute.
2. FMAT1013 Substitution Conclusion
The conclusion regarding key electrical parameters and substitution feasibility for the FMAT1013 is identical to that for the SA6-09. Compared with the original SA18H‑09, the FMAT1013 likewise provides matched 9 dB attenuation, 50 Ω impedance, and 2 W power handling. However, its frequency range (0–6 GHz) is the same as that of the SA6‑09 and is notably narrower than the original part’s 0–18 GHz range. Consequently, the FMAT1013 can only serve as a direct replacement in applications where the operating frequency does not exceed 6 GHz. For broadband or high‑frequency (>6 GHz) applications, it cannot substitute for the original part due to the frequency‑performance mismatch. Any differences between the FMAT1013 and the SA6‑09 are likely limited to secondary mechanical dimensions or internal construction, which do not affect this core conclusion.
Analysis ID: BC93-0FE5000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com