Original Part
Alternative Part
1. FMAT7467-9 Substitution Conclusion
From a core electrical parameter standpoint, the FMAT7467-9 is identical to the original SA26B-09 part in terms of attenuation value (9dB), power handling (2W), and impedance (50Ω). It can serve as a direct drop-in replacement for applications at frequencies up to and including 12 GHz. The key difference lies in the frequency range: the original part covers DC to 26 GHz, while the FMAT7467-9 is only specified for DC to 12 GHz. If the original circuit operates above 12 GHz (e.g., in Ku-band or higher frequency applications), substituting with the FMAT7467-9 will result in its attenuation performance deviating from the nominal value, with increased insertion loss. This can lead to signal distortion or degraded system performance, rendering it unsuitable for high-frequency scenarios.
2. SA6H-09 Substitution Conclusion
The SA6H-09 matches the original SA26B-09 in fundamental parameters such as attenuation, power rating, and impedance. However, it is only a viable substitute for low-frequency applications at or below 6 GHz. Similar to the previous case, the primary deviation is a significant reduction in the supported frequency range (DC to 6 GHz versus DC to 26 GHz). The effective operational bandwidth of the SA6H-09 is far narrower than that of the original component, making it unusable in any mid- to high-frequency microwave circuits (such as C-band and above). Operation above 6 GHz cannot guarantee performance; the part would likely become a bottleneck in the system link, causing anomalous signal attenuation. Consequently, its applicability as a substitute is extremely limited.
Analysis ID: 6221-4302000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com