Original Part
Alternative Part
1. SA6H-12 Substitution Conclusion
The SA6H-12 can serve as a substitute for the SA18E-12, but only in applications where the operating frequency does not exceed 6 GHz. The key technical distinction between the two parts lies in their frequency ranges: the SA6H-12 covers 0–6 GHz, while the SA18E-12 supports 0–18 GHz. Beyond 6 GHz up to 18 GHz, the SA6H-12 cannot guarantee specified attenuation accuracy and impedance matching, which may lead to signal distortion or degraded system performance. In all other respects—including attenuation value (12 dB), power handling (2 W), impedance (50 Ω), and interface type (SMA plug-jack)—the two parts are identical. Therefore, for frequencies below 6 GHz, the SA6H-12 is a directly interchangeable equivalent substitute.
2. FMAT1014 Substitution Conclusion
The FMAT1014 can replace the SA18E-12, subject to clear frequency and mechanical compatibility constraints. Two main differences exist: first, the frequency range—the FMAT1014 operates from 0 to 6 GHz, whereas the SA18E-12 covers 0–18 GHz. This restricts the FMAT1014 to reliable operation only below 6 GHz. Second, there are mechanical/dimensional variations: the FMAT1014 is described as “SMA 1.22,” while the original part specifies “SMA SS 1.35.” This suggests potential subtle differences in connector type (e.g., standard SMA vs. reverse-polarity SMA) or housing length, which must be verified for physical fit during actual installation. There is a risk that direct replacement may not be feasible or may require adjustment of mounting space. Provided the operating frequency is ≤6 GHz and mechanical compatibility is confirmed, the electrical parameters (12 dB, 2 W, 50 Ω) meet the substitution requirements.
Analysis ID: D278-8582000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com