Original Part
Alternative Part
1. FMAT7467-10 Substitution Conclusion
The FMAT7467-10 can serve as a conditional substitute for the SA18SS-10, with the core difference being its reduced frequency range of 0–12 GHz (compared to 0–18 GHz for the original part). If your application operates below 12 GHz, this part fully matches key parameters such as attenuation, power handling, and impedance, and can be directly substituted. However, if the system involves the 12–18 GHz band, this part will fail to function properly due to severe insertion loss increase and degraded VSWR, leading to system performance failure or degradation. Therefore, substitution is not viable in such cases.
2. SA3SR-10 Substitution Conclusion
The SA3SR-10 is not recommended as a substitute for the SA18SS-10, primarily due to its significantly reduced frequency range of 0–3 GHz (versus 0–18 GHz for the original part). This part is only suitable for attenuation requirements in low-frequency applications, such as baseband, low-frequency RF, or digital signals, and cannot cover mid-to-high frequency or microwave bands (above 3 GHz). If forced into a system operating above 3 GHz, it will introduce substantial additional loss and impedance mismatch. Moreover, its severely deviated frequency response may cause signal distortion, system instability, or even damage to downstream circuits. Hence, it is not a feasible substitute.
Analysis ID: 8BF6-ECA8000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com