Original Part
Alternative Part
1. LCAT1001-10 Substitution Conclusion
The LCAT1001-10 matches the original SA18SS-10 in attenuation (10 dB), power rating (2 W), impedance (50 Ω), and package (SMA In-Line Module). However, a key difference is its frequency range, which is limited to 0–3 GHz compared to the original’s 0–18 GHz. If the application involves signals above 3 GHz—such as in microwave communications or radar systems—using the LCAT1001-10 may lead to degraded attenuation accuracy, increased VSWR, or even thermal damage, as it is not designed for higher frequencies. Substitution should only be considered if the system operates strictly below 3 GHz; otherwise, it is not recommended.
2. LCAT1000-10 Substitution Conclusion
The LCAT1000-10 is identical to the original SA18SS-10 in attenuation, power rating, impedance, and package, but its frequency range is limited to 0–6 GHz versus the original’s 0–18 GHz. Within the 6 GHz to 18 GHz range, the attenuation characteristics of the LCAT1000-10 may become unstable, causing signal distortion, increased reflection, or reduced efficiency, thereby compromising high‑frequency system performance. Substitution feasibility depends strongly on the maximum frequency requirement of the application. If the system operates only below 6 GHz, the LCAT1000-10 is acceptable; otherwise, a part covering the full frequency range should be selected to ensure reliability.
Analysis ID: 3D5A-C798000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com