Original Part
Alternative Part
1. LCAT1001-08 Substitution Conclusion
Direct substitution is not recommended. While the LCAT1001-08 matches the original SA26B-08 part in fundamental parameters such as attenuation value, power handling, and impedance, its most critical specification—frequency range (0–3 GHz)—is significantly narrower than the original's 0–26 GHz. If the operating frequency exceeds 3 GHz, the performance of this attenuator will degrade sharply. This includes significant deviation from the nominal attenuation value, degraded VSWR, and potentially high insertion loss. Consequently, it cannot ensure circuit performance in the high-frequency range (>3 GHz) and is suitable only for low-frequency applications where the operating frequency remains entirely within 3 GHz.
2. FMAT7620-8 Substitution Conclusion
Substitution is feasible under specific conditions, contingent upon evaluating the system's frequency requirements. The FMAT7620-8 is identical to the original SA26B-08 in key parameters including attenuation, power rating, and impedance. The difference lies in its frequency range (0–18 GHz), which is less than the original's 0–26 GHz. For systems operating below 18 GHz, this part can deliver performance comparable to the original. However, for applications in the 18 GHz to 26 GHz range, this attenuator cannot guarantee specified performance and should not be used. The viability of substitution depends entirely on whether the system's actual maximum operating frequency falls within 18 GHz.
Analysis ID: 1740-6C2C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com