Original Part
Alternative Part
1. SA18E-09 Substitution Conclusion
From an electrical performance perspective, the SA18E-09 is fully capable of directly replacing the original SA6H-09. Their key specifications—attenuation (9dB), rated power (2W), impedance (50Ω), and interface type (SMA In-Line Module)—are identical. The difference lies in the frequency range: the SA18E-09 operates from 0–18 GHz, significantly wider than the original part's 0–6 GHz. The SA18E-09 covers the entire operational bandwidth of the original part while offering a higher frequency ceiling and superior high-frequency performance. Its performance is at least equivalent to, if not better than, the SA6H-09 within the 0–6 GHz range. This qualifies it as a "high-performance compatible" drop-in replacement, typically without introducing compatibility issues.
2. FMAT7467-9 Substitution Conclusion
The FMAT7467-9 presents basic feasibility for replacing the original SA6H-09, but attention must be paid to interface details. Their critical electrical parameters—9dB attenuation, 2W power handling, and 50Ω impedance—are identical. Furthermore, the FMAT7467-9's frequency range of 0–12 GHz fully covers and exceeds the original part's 0–6 GHz requirement. The notable difference is in the interface description: the FMAT7467-9 is listed as "JACK-PLUG," which is the reverse of the original part's "PLUG-JACK" sequence. This suggests a potential difference in the physical orientation or gender configuration of the plug and jack. At the mechanical connection level, it is essential to verify that the connector gender arrangement of the FMAT7467-9 matches that of the original part and the system port. Failure to confirm this mechanical compatibility could result in an inability to physically mate the connector. Once this is verified, electrical substitution is viable.
Analysis ID: 0049-8A78000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com