Original Part
General Purpose Digital Isolator 4000Vpk 1 Channel 150Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Alternative Part
General Purpose Digital Isolator 3750Vrms 1 Channel 15Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
General Purpose Digital Isolator 3750Vrms 1 Channel 15Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
1. SI8719BC-A-ISR Substitution Conclusion
Not recommended as a direct replacement. While it offers advantages in isolation voltage (3750Vrms > ~2830Vrms equivalent) and common-mode transient immunity (35kV/µs > 25kV/µs), along with a wider supply voltage range (2.5V-5.5V), its core deficiency lies in its data rate (15Mbps), which is only one-tenth that of the original part (150Mbps). Furthermore, its propagation delay (50ns) and pulse width distortion (25ns) are significantly higher than the original part's specifications (16ns, 1ns). This device is only suitable for low-speed signal isolation. If used in the original design's high-speed channel, it will cause severe signal integrity degradation or communication failure.
2. SI8720BC-A-ISR Substitution Conclusion
The conclusion is identical to that for the SI8719BC-A-ISR: not recommended as a direct replacement. Based on the provided parameters, the key specifications of the SI8720BC-A-ISR (data rate, delay, isolation, CMTI, supply) are completely consistent with those of the SI8719BC-A-ISR. They are likely different versions or package codes of the same base part. Consequently, it shares the same fundamental issue: its data rate (15Mbps) and timing performance (50ns delay, 25ns distortion) cannot meet the requirements of the original high-speed application. It is only suitable for applications with low-speed requirements and cannot functionally replace the ISO721MMDREPG4.
Analysis ID: CC08-9F3B000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com