Original Part
Alternative Part
1. LM2902VDTBR2G Substitution Conclusion
From a review of key parameters, the LM2902VDTBR2G aligns with the original part in supply voltage range (3-32V) and output current (40mA). However, several notable discrepancies exist: its gain bandwidth product (1 MHz) is marginally lower, the input bias current (90 nA) is significantly higher than the original (20 nA), and critical specifications such as output type and slew rate are absent from the datasheet. Direct substitution may pose performance risks in applications demanding higher bandwidth, low input bias current (e.g., high-impedance sensor interfaces), or a well-defined push-pull output characteristic. More critically, its parameter table does not list AEC-Q100 automotive-grade qualification, which is a disqualifying deficiency for the automotive applications for which the original part is specified. Therefore, it is not a viable substitute in the automotive domain.
2. LM2902KAVMPWREP Substitution Conclusion
This device closely matches the original part in core specifications, with some parameters being superior: it offers a wider supply range (3-32V), stronger output drive capability (60 mA), comparable slew rate (0.5V/µs) and gain bandwidth product (1.2 MHz), and an identical input bias current (20 nA). The differences are a slightly higher input offset voltage (3 mV) and an unspecified output type. For most general-purpose amplification or comparator circuits, its electrical performance is compatible and can even provide enhanced load driving capability. The "EP" suffix typically denotes TI's Enhanced Product line, which implies higher reliability standards, making it a candidate for industrial or even automotive applications. However, to confirm it as a direct drop-in replacement, verification is still required to ensure it fully meets AEC-Q100 certification requirements and that its output structure is push-pull.
Analysis ID: 51A9-FF85000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com