Original Part
Alternative Part
1. LCAT1001-10 Substitution Conclusion
Substitution is not recommended. The frequency range of the LCAT1001-10 is limited to DC-3 GHz, whereas the original LCAT1006-10 supports DC-18 GHz. This is a critical difference. If your system or test signal frequency exceeds 3 GHz, using the LCAT1001-10 will introduce significant additional attenuation—its attenuation increases sharply and unpredictably above its nominal frequency. Furthermore, impedance mismatch may cause signal reflections, severely degrading system performance. Consequently, it is only suitable for low-frequency applications below 3 GHz and cannot replicate the original part's wideband capability.
2. LCAT1000-10 Substitution Conclusion
Conditional substitution, requiring strict evaluation. The LCAT1000-10 has a frequency range of DC-6 GHz, which is better than the LCAT1001-10 but still far below the original part's 18 GHz. Performance cannot be guaranteed within the 6 GHz to 18 GHz range. The actual attenuation may deviate from the nominal 10dB, and the Voltage Standing Wave Ratio (VSWR) may degrade, leading to signal integrity issues. It may only be used as a downgraded substitute if you have confirmed that the system's or test's maximum operating frequency does not exceed 6 GHz. It is absolutely unsuitable for any application involving frequencies above 6 GHz.
Analysis ID: 2601-7618000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com