Original Part
Alternative Part
1. FMAT7467-10 Substitution Conclusion
The FMAT7467-10 is identical to the original LCAT1005-10 in key specifications: attenuation (10dB), power handling (2W), impedance (50Ω), and package (SMA In-Line Module). However, its frequency range is limited to 0 Hz to 12 GHz, compared to the original's 0 Hz to 18 GHz. Therefore, the FMAT7467-10 is only suitable for applications where the operational frequency does not exceed 12 GHz. For systems operating above 12 GHz, this part is not a valid substitute. Its high-frequency performance may degrade or fail, leading to inaccurate signal attenuation or potential equipment damage. For low-frequency applications (≤12 GHz), it can serve as a direct drop-in replacement, but it is not viable for full-bandwidth requirements up to 18 GHz.
2. SA3SR-10 Substitution Conclusion
The SA3SR-10 matches the original LCAT1005-10 in attenuation (10dB), power rating (2W), impedance (50Ω), and package (SMA In-Line Module). However, its frequency range is significantly reduced to 0 Hz to 3 GHz, far below the original's 0 Hz to 18 GHz. Consequently, the SA3SR-10 is only applicable for low-frequency applications, such as communication or test systems operating at 3 GHz and below. At higher frequencies (e.g., microwave or millimeter-wave bands), its performance will degrade substantially, potentially causing signal distortion or attenuation errors, and it cannot meet broadband requirements. The SA3SR-10 can only substitute for the original part in scenarios strictly limited to 3 GHz or less; it is completely unsuitable for full-bandwidth applications.
Analysis ID: 5244-50ED000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com