Original Part
Alternative Part
1. SA6-03 Substitution Conclusion
The SA6-03 cannot serve as a full drop-in replacement for the original LCAT1005-03 part. The key limitation lies in its operational frequency range. The SA6-03 has an upper frequency limit of 6 GHz, whereas the original component supports frequencies up to 18 GHz. In any application scenario operating within the 6 GHz to 18 GHz band, the SA6-03 will not function correctly. This may lead to excessive signal attenuation, degraded performance, or increased reflection. Therefore, it is suitable only for systems confirmed to operate at or below 6 GHz.
2. LCAT1000-03 Substitution Conclusion
The LCAT1000-03 cannot be considered a complete functional substitute for the original LCAT1005-03 part, with the primary difference again being the frequency range. As part of the same brand (L-com) family, the LCAT1000-03 matches the original part in attenuation value, power rating, impedance, and connector interface. However, its maximum frequency is limited to 6 GHz, significantly lower than the 18 GHz capability of the original. In high-frequency microwave applications exceeding 6 GHz, the attenuation accuracy, impedance matching, and VSWR performance of the LCAT1000-03 may degrade substantially or even fail. Consequently, it can only be considered as a cost-reduction or availability alternative for low-frequency (DC-6 GHz) applications.
Analysis ID: DAFE-E69A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com