Original Part
Alternative Part
1. FMAT7467-7 Substitution Conclusion
Substitution is feasible under specific conditions, but with critical performance degradation; system frequency requirements must be rigorously evaluated. The difference between the FMAT7467-7 and the original part lies in its frequency range, which is limited to DC–12 GHz, whereas the original part supports DC–18 GHz. In the high-frequency band from 12 GHz to 18 GHz, performance parameters such as attenuation accuracy and VSWR of the FMAT7467-7 may not be guaranteed and could even fail. Therefore, it is not suitable for systems operating in the 12–18 GHz range. If your application operates strictly below 12 GHz, and provided that power rating (2W), impedance (50Ω), and connector interface (SMA) are compatible, this part can be used as a substitute.
2. FMAT7466-7 Substitution Conclusion
Substitution is feasible under specific conditions, but with critical performance degradation; system frequency requirements must be rigorously evaluated. The substitution feasibility for the FMAT7466-7 is identical to that of the FMAT7467-7. The core difference from the original part likewise lies in the frequency range (DC–12 GHz vs. DC–18 GHz), which precludes its use in any RF link involving the 12–18 GHz band. The “SS” designation in its description likely refers to a stainless-steel housing, which is a mechanical and material characteristic and does not affect the fundamental electrical substitution assessment. Provided the actual operating frequency does not exceed 12 GHz, this part can serve as an alternative.
Analysis ID: 8CEA-00E1000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com